When House Cleaning, the shower doors and walls are pretty obvious, but what about the sliding shower door track? If you overlooked that area of your bathroom, don’t feel bad. Shower door tracks may not be a frequent thought when House Cleaning. However, if you’re beginning with the muck on the shower door, you probably want it gone immediately.
Are you wondering how to clean the tracks of your aluminum shower door? Discover how, with just two easy methods, in this House Cleaning guide by Los Angeles experts.
Using Vinegar to Clean Shower Door Tracks
If you’re acquainted with all-natural House Cleaning, you won’t be shocked to know that distilled white vinegar may assist in removing soap scum and hard water stains from your shower door tracks. Due to its acidic nature, white vinegar is a mold killer.
The House Cleaning Ingredients you’ll be needing are:
- white vinegar,
- a microfiber cloth,
- an empty spray bottle,
- a used toothbrush or a grout scrub, and
- a sponge.
1. Transfer a generous amount of vinegar to the spray bottle, then spray it along the tracks carefully. You may not need so much vinegar as your objective is to moisten the trails but not flood them.
House Cleaning Warning: If you have stone flooring or tiles, more caution is required during application. Vinegar may cause irreversible harm to stone surfaces.
2. Allow 30 minutes for it to sit.
3. Scrub the soap scum and dirt gently using an old toothbrush or grout brush.
4. Use the sponge to difficult-to-reach places; then, wet it and spread it all down the track.
5. Repeat the procedure as needed. If you haven’t cleaned your shower door tracks in a while, you may need to give them a few passes.
6. To eliminate any leftover vinegar residue, mist the track with water.
7. Then, dry the spot with a microfiber towel.
Using Lemon to Clean Shower Door Tracks
If your shower door is mounted on metal rails, you will encounter a few problems. While metal is susceptible to rust, deposition mold, soap scum, and minerals from hard water are the primary issue. As a consequence, the frame will have an unsightly and filthy appearance. Are you a lover of the citrus scent? The good news is that lemon juice is the most efficient House Cleaning agent from Los Angeles for your crusty shower door tracks, especially those made of metal.
The House Cleaning Ingredients you’ll be needing are:
- lemon juice,
- a microfiber cloth,
- salt, and
- an old toothbrush.
1. Combine lemon juice and salt until smooth paste forms.
2. Apply the paste with an old toothbrush to any inaccessible areas and corners where rust often develops. You may also use the lemon wedges dipped in salt to scrub the tracks.
3. After about 25 minutes, rinse the mixture with warm water and dry it with a damp towel.
Filthy shower door tracks, no more! The House Cleaning team in Los Angeles suggests regular upkeep on this often-neglected area to avoid a heavy buildup of grime.
