Cleaning stovetop is necessary since this is the one most people use to cook food. To avoid contamination, cleaning stovetop effectively is a must. If you think cleaning your stovetop is not important, then this blog is for you. In this article on how to clean gas stove top, we will provide you with information on why cleaning your stovetop is important and will teach you how to clean a gas stovetop effectively with the right amount of knowledge shared by our professional cleaners from house cleaning agencies in Los Angeles.
Precautions
If you have a gas stove at home, you know you have to take some extra precautions when you’re cleaning or cooking and we recommend that you familiarize yourself with kind of the rules of your particular gas stove before you get started on your cleaning journey. Just check out the manufacturer’s instructions whether you look them up online or check the booklet that came with your appliance. That being said, you have to be mindful about what you remove and how you remove it and what you turn on and off before you start cleaning. In this case we would prevent wrong decisions and could prevent damages from stovetops.
Product and Tools
The product and tools you have to use are very similar to the products and tools that you also use to clean pots and pans. We don’t want to cause scratching but we have a lot of grease and grime and build-up that we need to get rid of. Take a look of these tools that we recommend and you may also make this as your checklist.
List of Tools:
- Rubber Gloves – To protect your hands.
- Scrub – Look for a non-scratching scrub but also strong enough to get the job done.
- Cleaning toothbrush
- Microfiber Cloth – which you’re going to use for wiping and drawing.
- All-purpose cleaner – Essentially dish soap and water.
- Dish soap – For soaking.
- Dish Soap Spray – For those heavy-duty areas, you may use this to spray rather than using something like a cream cleanser because you don’t want to deal with scraping that out of any burners.
- Water and Baking Soda – In the event that you need to remove any gunk from a burner, we recommend baking soda. But please be mindful because that’s going to require a lot of cleanups after.
Disassemble
Putting on the gloves before attempting any of these heavy-duty jobs just makes you feel a little bit more powerful. Now, disassembling all the things at the top of your gas stove you might need to get a container in which you can put all the parts so you don’t have to lose every single piece of it.
Soaking
This is the part we recommend about pre-treating these burner pieces by using dish soap, baking soda, and warm water. For the stovetop, use heavy-duty dish soap spray and that’s only for spot-treating certain areas that are really dirty. There are some areas that aren’t so bad you might switch using to a general all-purpose cleaner, just soap, and water. Again, if there’s really grimy you might use heavy-duty dish soap spray everywhere. Moreover, for the grapes, use the same all-purpose cleaner just to get them wet, these aren’t too bad maintaining them pretty well. But for the areas that are really dirty use always the heavy-duty dish soap spray. Additionally, you may soak all small or other parts of your stoves for 5 to 10 minutes to make sure all hard grimes will be easy to remove.
Cleaning
After soaking, then you may now clean all the parts using your scrub and a toothbrush. If there’s an area that hard to reach, rinse it with warm water and put it in a dish towel to make it dry. For the cooktop, use a scrub to clean all the grimes and stains. Also please be mindful of putting water on the top of your stove. We suggest using the microfiber cloth for rinsing to avoid any water going into the stove itself to avoid any issues where the gas comes out. Wipe it until you don’t see any dirt and finish it with a dry microfiber cloth.
Drying
Once all the parts are properly rinsed, you’re going to have to dry them really well. They’re cast iron and they can rust pretty easily if you don’t dry them fully before you replace them. Before replacing everything give them another time to dry just to make sure.
Assemble
After all the parts are dry, this would be the time when you assemble the parts at the top of your stove like a puzzle piece and make sure you put them in the right area where they have to be there. If it doesn’t feel easy and obvious it’s probably not the right spot. If possible, follow the instructions in your stovetop’s box or check the manufacturers website online so you will know that you are not doing anything incorrect and most importantly if you feel like you’re guessing on how to assemble it, it’s important to reach out to a professional.
Frequently Asked Questions
By using the right equipment, you may start cleaning it. You may start using an all-purpose cleaner, scrub, and microfiber. If there’s any heavy grime use heavy-duty dishwashing soap to remove all the grime, grease, and stains.
You always have to dissemble first all the parts of your stove so you can clean each part and see what you should have to clean on the top of your gas stove.
By cleaning it once a week or so, it will not be hard for you to remove all the grimes, Grease, and stains.
We recommend using baking soda to get rid of stains and burned-on food. Directly sprinkle baking soda over the soiled area, then mix in a little water to create a paste. For 30 minutes, leave a warm, damp cloth on top of the area. Then make an effort to clean the place.
Conclusion
In conclusion, some cooktops didn’t require too much effort but it is necessary to give your stovetop a decent cleaning once a week or so it doesn’t take so long to disassemble. Give everything a scrub and put it back really prevents you from having to do that heavy-duty scrubbing. Cleaning stovestops will have benefits for the health as well and for your kitchen environment. By cleaning them regularly, it would prevent for the spread of bacteria.
