We all want our bathrooms to be spotless, but most people do not particularly enjoy cleaning the house especially the grout and tiles in their showers. But it’s simpler than you may imagine, and with these experts suggestions from house cleaning in Venice Beach, the right cleansers, and the right methods, you can have everything spotless in no time.
1. Obtain or Prepare the Proper Cleaner
The best way to clean stone floors is to use an alkaline cleaner, such as bleach, or other cleaning agents that have been approved by stone flooring manufacturers. Depending on the type of tile you have in your bathroom, you can use more aggressive acidic cleaners or vinegar and baking soda solution to clean the floor.
Additionally, you can create natural or DIY bathroom cleaners. Although baking soda can leave a yellowish residue on your tiles, using a paste from baking soda (2 or 3 cups of baking soda or bicarbonate of soda to 1 cup of warm water) can also help. Stains on tiles or grout can also be removed by adding some hydrogen peroxide, 3 percent.
2. Clean Up Your Grout
Typically, cleaning dirty grout or bathroom tile involves some agitation. For deep cleaning the grout between bathroom tiles, you’ll also probably need a tiny, thin scrub brush that can fit between floor tiles, though an old toothbrush will do. With the right cleaning solution for your floor tile material and a brush like this to agitate or remove the dirt, you may significantly improve the appearance of your flooring, house cleaning in Venice Beach added.
3. Lift up any residue with a safety razor.
You can use a safety razor to carefully scrape away or pick out the dirt from your grout if there are a lot of soapy residues or other build-ups. Extremely grimy grout may need to be replaced, in which case you can prepare the area for new grout installation by scraping out the old grout using a triangular scraper tool or even a rotary power tool.
4. Clean Up Everything
After deep cleaning the grout and any remaining grime from the surface, wipe everything off with a sponge or rag and have a nice, clean shower.
What Not to Do When Cleaning Bathroom Tile and Grout
Contrary to popular belief, Venice Beach housekeeping service says a mop and bucket should never be used to clean a tiled bathroom floor. This is so that the floor isn’t covered in filth and grime after mopping. Consider this: if you continually dip a mop into the same pail of water and scrub your floor with it, you will merely spread black or gray water around or even scrub it deeper into the grout lines. As a result of the unclean water evaporating and leaving the dirt in the grout and on the tiles, the issue is made worse.
On the other hand, you may effectively wipe down your bathroom floor in between deep cleanings with a long-handled mop with a disposable pad, a steam mop, or even a damp towel or rag.
Although you may have heard of using bleach to clean your bathroom, keep in mind that depending on the nature of the tiles, chlorine bleach and similar chemicals might destroy grout or even discolor them.
How much does it cost to clean the grout and tiles in the bathroom?
The equipment required to clean the grout and tile in your shower should cost you no more than $20. While a power tool is not always essential, a steam mop or other comparable device can cost anywhere from $120 and over, depending on the bells and whistles you want.
Although cleaning the grout and tile in your shower and bathroom is quite simple, you might want to hire a professional cleaning lady to make sure the job is done correctly. In that situation, you should expect to pay between $280 and $645 to hire a local house cleaning service. Maggy Maid is the best house cleaning in Venice Beach, they are firm to deeply clean your bathroom’s tile and grout thoroughly. They are the leading maid service in Los Angeles and its surrounding areas.